1. The environment of the elevator machine room should be cleaned up, the doors and windows of the machine room should be weatherproof and marked with the words “machine room is important, no one is allowed to enter”, the passage to the machine room should be smooth and safe, and there should be no other equipment not related to the elevator in the machine room;
2. The power board and power switch in the machine room should meet the specification requirements, and the installation position should be reasonable, firm and well labeled, and the wire groove in the machine room should be laid in a reasonable and standardized way;
3, power lines and control lines are laid in isolation, corner plus speculative pad;
4, well ventilated machine room, machine room ambient temperature should be maintained between 5-40 degrees, the machine room should be equipped with a fixed test electrical lighting, floor surface illumination is not less than 200LX;
5、The machine room should have emergency call device and its manual;
6、The holes in the elevator shaft and machine room, the pilot rope level marking, elevator running direction marking, etc. should meet the specification requirements;
7. The control cabinet in the machine room should be installed correctly, the control cabinet should be installed correctly, and the wiring in the control cabinet should be reasonable and beautiful. The control cabinet should be installed correctly and the wiring in the control cabinet should be reasonable and beautiful;
8. There should be necessary fire fighting equipment in the machine room.